21+ Line Output Converter Wiring Diagram. *yes* 87 should be hot. Looking at the schematic if you 1) cut out the splice s284 so that power no longer goes to pin 1 only pin 6 2)cut the bk/lb wire that comes out of pin 4 and now wire that to pin 1.
No, you want to connect to the remote output, unless its stock then you’ll want to use a switched 12v. The leadframe contains the turbine shaft speed (tss), output shaft speed (oss), transmission fluid temperature (tft) and transmission range (tr) sensors. I have looked at every wiring diagram i can find and read several threads and the information i’ve.
I Can Post Some Pics When I Get Home In A Few Days But I'm Sure Someone Will Beat Me To It.
Most people hook up the intercooler pump relay so it comes on with key on / ignition. 30 should go to the fused bap line. Found this truck online, was going to buy it for myself.
*If By 'Fpdm Yellow/Green' You.
Use fpdm signal wire to trigger pump one. I call in, and the salesman explains that the $107,130 doesn’t include the $26,351 upfit package. Matched threat adding a whipple supercharger to svtp’s project triple threat by steve turner photos by stacy stangz as you know, svtp has a robust stable of project.
I Do These All The Time As Many Of You Know I'm A Professional Installer.
As far as the wiring its easy. If you have an unused ecu output pin though you can wire it up to that and enable the. *yes* 85 should be ground.
Looking At The Schematic If You 1) Cut Out The Splice S284 So That Power No Longer Goes To Pin 1 Only Pin 6 2)Cut The Bk/Lb Wire That Comes Out Of Pin 4 And Now Wire That To Pin 1.
*yes* 86 (trigger) should go to fpdm yellow/green. The leadframe contains the turbine shaft speed (tss), output shaft speed (oss), transmission fluid temperature (tft) and transmission range (tr) sensors. First off i'm extremely frustrated with this wiring as it should be simple.
*Yes* 87 Should Be Hot.
I have looked at every wiring diagram i can find and read several threads and the information i've. No, you want to connect to the remote output, unless its stock then you'll want to use a switched 12v.