10+ Trunk Mounted Battery Wiring Diagram. Fusible links are best and as stated do not. The coyote pcm does not want to see a large voltage drop, so i am running two positive cables from the battery in.
For those with trunk mounted batteries, how do you prefer to route the starter cable and alternator charge wire? My trunk mounted battery is grounded to the body at the rear and i have a good ground cable up front, body to motor no problems. Running 0/1 gauge from solenoid in trunk to the starter which will only be hot during cranking.
Running 0/1 Gauge From Solenoid In Trunk To The Starter Which Will Only Be Hot During Cranking.
I have done a lot of analysis on the positive cable wiring. For those with trunk mounted batteries, how do you prefer to route the starter cable and alternator charge wire? Ground wire is the same gauge and have the ground wire going to the disconnect switch and then to.
My Trunk Mounted Battery Is Grounded To The Body At The Rear And I Have A Good Ground Cable Up Front, Body To Motor No Problems.
They also say not to use a fuse in. The coyote pcm does not want to see a large voltage drop, so i am running two positive cables from the battery in. Need wiring diagram and wire gauge sizes.
The Wire To The Starter Is 0 Gauge.
Here's a wiring diagram for my setup. Instructions say wire the box directly to the battery. Fusible links are best and as stated do not.
There Are Plenty Of Threads If You Search For Trunk Mount.
To remedy this, i've drawn up my own plans (combining a few i've found online) to figure out what i need to do to make the best battery relocation set up. I am relocating the battery to the trunk and i wanted to know the proper, nhra legal wiring method and the parts i need to purchase to accomplish this task. Running another line from battery to.
I'm Mounting My Battery Up On The Shelf Between The Rear Seat And Trunk Divider To Hide It And Give More Trunk Space.
I'm doing some electrical planning for my 66 bb dart build.
