13+ Fog Light Wiring Diagram. I have the fog lights. I also have the plug for the switch already installed for the fog light wiring (done at the factory).
There is a light wiring harness which is about 3′ long that goes to each light and to this orange/red wire with connector. Ok i know wiring fog lights in with the wires that come with it is easy, but what i’m wanting to do is wire it to the factory switch that is in my jeep. Now i was wondering if anyone else has a.
There Is A Light Wiring Harness Which Is About 3' Long That Goes To Each Light And To This Orange/Red Wire With Connector.
I bought a factory fog light switch and want to hook it up for use with my auxillary lights, i just need to. As for wiring them with the high beams, it can be done.but its not worth the trouble. Look at this sorta flow chart and see if you understand.
Get Yourself A Test Light And Poke Into The Wire With The Pointed Lead While The Low Beam Is Turned On.
Its what gives power to the switch. I do not have wiring from the relay. I am going to wire up a set of hella 500 fogs.
Ok I Know Wiring Fog Lights In With The Wires That Come With It Is Easy, But What I'm Wanting To Do Is Wire It To The Factory Switch That Is In My Jeep.
U will need this also. Don't have to fish or run wires thru. I have the fog light switch.
On My 89 The Plug For The Fog Light Switch Was Behind The Dash On The Right Side Of The Steering Column It Has 3 Wires Going To It.mine Never Had Factory Fog Lights But The Plug For.
I'm assuming there will be a wire. I have the fog lights. I also have the plug for the switch already installed for the fog light wiring (done at the factory).
Now I Was Wondering If Anyone Else Has A.
Once you have it, then switch to high beams to see if that same wire is not. 16 gauge wiring (black/red) to power your relay 1 waterproof fuse holder and a 20a fuse to match 1 relay base with 5 terminals 1 double pole single throw relay (i used. I have a 2000 tj and bought the factory wiring harness to install into my jeep for fog lights.
