13+ Hh 5 Way Switch Wiring

I'm Building An Hh Strat With 1 Vol & 2 Tone Controls And A 5 Way Switch.

Position 2 = neck & bridge outside coils; The standard ibanez wiring for 2 humbuckers. What i'd really like to do is wire it to be able to split the humbuckers in positions 2 & 4, but i'm not sure.

Or If The Pups Are Splittable The Mid Position Might Be Wired To Turn On.

I plan to use this 5 way, 24 leg super switch and the original pots that came with the strat. A 3 way tipically turn on 1 neck, 2 both, 3 bridge. Position 2 = neck parallel;

I Can't Seem To Find A Good Diagram For Exactly What.

Position 3 = neck & bridge; Put a small resistor between the coil tap wires and ground. Follow the wiring diagram, understand the basics of a 5 way switch, and experiment.

Wiring, Connections And Internal Circuit Of 5 Way Switch In Hh Configuration, Both Parallel And Series.any Comment Or Suggestions Are Welcome.facebook:

Wiring position 3 = neck & bridge; If anyone has insight on how to wire this setup, i'd be very grateful. Tipically a hh config with w 5way switcher will do this.

Same 5 Pickup Configurations As The Prs 5 Way Rotary Switching.

Position 4 = neck & bridge inside coils;