I’ve checked the wiring a thousand times. First turn off the power to the raspberry pi and then follow this wiring diagram to connect the gps module to the raspberry pi gpio. 2 x 15cm cable ,,, categories:
Ones With The 18X18Mm Ceramic Antenna And Others With 28X28Mmceramic.
This is noticeable when viewing the home position, home arrow. This is my first attempt at using gps with betaflight. There are basically two types of beitian modules:
2 X 15Cm Cable ,,, Categories:
There are many gps modules that can be used in quadcopters for navigation. And it gets worse the higher i set the baud rate. More on topic, i had a similar issue.
First Turn Off The Power To The Raspberry Pi And Then Follow This Wiring Diagram To Connect The Gps Module To The Raspberry Pi Gpio.
Ground v tx to rx and rx to tx. You can get these modules for less than $10. My problem is that the data received from the gps has a delay.
Perfect For Cc3D, F3 Rc.
I heard win 7 can be a problem but i don't know what the fix is. I've checked the wiring a thousand times.
