17+ 4 Way Tele Wiring. I'm working on a new partscaster and trying to figure out the wiring to make it have the options i need. This versatile switch allows you to access additional pickup combinations and unlock different tonal possibilities on.
Wiring diagram for the 4way Telecaster setup which allows all three from www.pinterest.co.uk
Wire connecting this tab to the black wire, and grounding the cover. You will need to break this connection. I’m working on a new partscaster and trying to figure out the wiring to make it have the options i need.
Neck White = Connected To Output Neck Black = Connected To Nothing* *(Since This Is The Coil Wire, The Neck Pickup Doesn’t Have Continuity) Bridge White = Connected To Output Bridge Black= Hard Ground To Pot See More
With this modification, you can achieve a variety of different pickup combinations,. It's going to have 2 pickups, and a master volume, master tone. Get meatier tele sounds without changing your pickups.
I'm Working On A New Partscaster And Trying To Figure Out The Wiring To Make It Have The Options I Need.
Running pickups in series without the separate. 1) bridge 2) neck + bridge (parallel) 3) neck 4) neck + bridge (series) (”3rd wire” mod required on neck pickup). Wire connecting this tab to the black wire, and grounding the cover.
Bridge And Neck Pickup (Standard) Position 3:
You will need to break this connection. This versatile switch allows you to access additional pickup combinations and unlock different tonal possibilities on. Neck pickup must have a separate ground wire for the pickup cover for use with 4 way switch.
