8+ Bronco Auxiliary Switch Wiring. Be sure to check out the entire. You can get pigtails from 4×4 to adapt one light to the fog switch, one to.
Aux switch wiring under hood with 6 pin connector Bronco6G 2021 from www.bronco6g.com
The auxiliary switches, aux1 through aux6, make aftermarket customization easier. So i added some led lighting to my bronco and wired up to the factory upfitter switches. Switch (s), you have (2) sets of lights.
While You Could Put Them Both.
Switch (s), you have (2) sets of lights. But the factory wiring for the switches seems to be a very small gage. The first thing is the aux1 switch wire is part of the vehicle harness all the way down to the bumper.
The Auxiliary Switches, Aux1 Through Aux6, Make Aftermarket Customization Easier.
Six prewired switches connected to the power. You can run the passenger side wire (red) to the drivers side and splice the two red wires together, and you can use a short stretch of wire to run from those to the colored switch wire of. Just make sure you connect the power wire to the aux wire that can safely handle 168w.
Be Sure To Check Out The Entire.
So i added some led lighting to my bronco and wired up to the factory upfitter switches. This video will walk you through the necessary steps to equip your ford bronco® suv with additional lighting that can be controlled via the auxiliary switches. What are the auxiliary switches for?
You Can Get Pigtails From 4X4 To Adapt One Light To The Fog Switch, One To.
